Hotspot: T-Mobile T10 Franklin Mobile Hotspot

The T10 Franklin Hotspot connects to T-Mobiles cellular network to provide a wireless connection to the internet for register, back office, and other devices. 

The above images show the T10 device, charger, and battery.

Setup

The setup for this device is simple. Everything you need to setup the device comes in the box, which includes:

• Get Started Guide, and other safety information
• SIM card (should already be installed in the device)
• Battery
• Battery Cover (removable bottom panel of the device)
• USB-C Charger
• Network ID Card: has SSID (network name) and password listed

To setup the device, follow these steps:

1. Remove all of the components from the box and packaging
2. Detach the bottom panel to expose the SIM card and Battery housing.
3. The SIM card should be installed already, if need be insert the SIM into the SIM Card Slot (pictured above) so that the T-Mobile logo is face up. 
4. Insert the Battery.
5. Reattach the Battery Cover.
6. Connect the USB-C charging cord to a power outlet to charge the device. 
7. Press and hold the Power button for 3 seconds to turn on the device. 
8. Open the Wifi settings on the device you need to connect to the internet.
9. Select the hotspots Wifi name (SSID) and enter the password, press Connect to connect to the internet.
   1. If you do not know the SSID and password and need to find this information, press the power button on the hotspot to display the network name and password.

To check for updates to the Hotspots firmware, review the following steps:

If you would like to view the full user guide, click here or download the PDF file attached to this article.