Hotspot: AT&T Netgear Nighthawk M6 Pro

The AT&T Netgear Nighthawk M6 Pro Model MR6110 is a mobile hotspot that can be used to provide access to the internet for up to 32 devices on a Wifi network. 

Contents

• Netgear Nighthawk M6 Pro MR6110
• Battery
• SIM card (should be preinstalled)
• Wall charger w/ USB-C cable

Connect to Network

1. Press the Power button to turn on the Nighthawk M6 device.
2. On your laptop or device, open the Wifi network connection manager.
3. Select the Nighthawk M6 network with the Wifi name and password.
   1. The Nighthawk M6 Wifi network name and password display on the LCD home page. If the screen is blank press and quickly release the Power button to display the network information. The default Wifi password is also printed on a label under the password.

Note: The hotspot has an Ethernet port on the back of the device which can be used to connect to the network directly through a wired connection.

Home screen

Device Components

SIM Card Location

The SIM card is located underneath the battery.

Updating the Device

1. On the hotspots home screen, select Settings.
2. Select More. 
3. Select Software, the Software Update screen should be displayed.
4. Select Check for updates now option, the screen should display any available update.
5. Select Update now to begin the installation. If you receive a Battery Low message, please charge the device, then choose to apply the update. 

The User Manual PDF is attached to this article.